ADF-Copy is a small device with a Teensy 3.2. This device connects to USB and a 3,5" PC floppy drive. This device makes it possible to read and write ADF's from or to a real Amiga diskette. Recent changes: Improvements for Trackgrid, Flux histogram, Index, SuperCardPro Format, Diskview and Revolutions.
This project is about connecting USB HID devices like keyboard and mouse to almost any Amiga. Now it is possible to connect a keyboard to the Amiga CDTV.
A new video from the Bread Box Commodore Computer Museum. In this video Justin shows a the new THE VIC20 from Retro Games Ltd. You can already pre-order this recreation of the Commodore VIC20 computer.
The Mini PET is a fully functional 6502 based computer, compatible with a Commodore PET 2001N-32 (3032/4032) computer. There is now more information available for all the options.
Tonyp12 is working on a new cartridge for the Commodore C64 computer. The features are: Cart mode (2 x 8 kByte), 64K ram spy mode, DMA mode (6510 disabled, mcu at 48MHz or 8MHz) and an USB firmware bootloader.
A new version of the Amiga flicker-fixer is available. The flicker-fixer is placed inside the Amiga on top of the Lisa chip. Improvements: V-Sync, keyboard support and auto-detect.
A new video from Dan Wood. In this video Dan talks about the Warp 1260. The Warp 1260 is an expansion for the Amiga 1200 with: 105 MHz 68060, 256 DDR3 RAM, 32-bit RTG graphics, USB, Wi-Fi, ARM co-processor, IDE, SD, mp3 and jpeg decoding.
Sidekick64 is a versatile cartridge/expansion for the C64, C128 and C16/+4 whose functionality is entirely defined by software running on a Raspberry Pi 3 (RPi). Emulation examples are GeoRAM/NeoRAM, freezer or a Dual-SID with FM.
C128Egretz is now producing new cartridge cases for the Commodore C64 computer. The cartridges are made with moulds and are available in different colours.
A new episode of the 10 Minute Amiga Retro Cast is now available. In this episode: A review of the Hard PCB Keyboard Membrane for the Amiga 1200 computer.
On the Amiga Love website intric8 wrote a blog about the TwoBit joystick swapper. The TwoBit is developed by Evie Salomon from Backbit and can be used on a Commodore C64 and the C128.
The sdbox is a new hardware project for the Amiga computers. With the sdbox is is possible to use files on a SD-card via the parallel port of the Amiga. The sdbox is developed by Jorgen Bilander, Tobias Niva and Niklas Ekström.
Paul Gardner-Stephen is working on a FPGA version of the Commodore C65. His goal is to make an 8-bit computer for the 21st century. Most recent updates: MEGA65 audio mixer, injection moulding, RAM expansion, timing and HDMI audio.
The COREi64 webpage offers a new product for the retro computer. With the CMD SuperCPU128 MMU Link board it is possible to quickly and safely move the MMU to a different Commodore C128.
The Mini PET is a fully functional 6502 based computer, compatible with a Commodore PET 2001N-32 (3032/4032), but in a much smaller form factor and with much less power consumption.
BeamRacer is a new expansion for the Commodore C64. This expansion enables precise control of the VIC-II graphics chip, allowing for a host of novel visual effects and freeing the CPU for other tasks.
Toms01 is working on a 1581 replica. He has built the PCB for the 1581 that uses an Amiga floppy-drive. But it is also possible to use a PC floppy-drive or a Gotek.
Rocky Bergen made a new papercraft design of a retro computer. This time he made the Commodore VIC20, VIC-1540 disk drive, 1351 joystick and a retro TV.
The PadSwitcher64 can be used to connect a Super Nintendo (SNES) control-pad to the Commodore C64. The features are: Joystick port selection via the control-pad and 4 buttons can be mapped including rapid-fire.
Amiga-Kit is now selling a 4 x IDE buffered IDE interface for the Amiga 600 or 1200. The features are: 2x 40-pin, 1x 44-pin, FastIDE support and 4+ GB (OS 3.5 - 4.1).
Paul Gardner-Stephen is working on a FPGA version of the Commodore C65. His goal is to make an 8-bit computer for the 21st century. Most recent updates: 8MB extra RAM, libc, QSPI flash updating, Real-Time Clock and external microSD.
The Q-36 Rapid Fire Modulator is a new hardware addition for the Commodore C64. With this device you can swap your joysticks and adjust the rapid fire function. The Q-36 is based on a design by Sven Petersen.
The SuperClone 5.0 is a clone of the Super Snapshot v5 hardware. It uses an Atmel ATF16V8B in the place of the original PAL. All the schematics and software is available on Github.
Retrohax and Willy are working on a new project for the Commodore 264 series. The ThED will be a replacement for the TED chip in the Commodore C116, C16 and the Plus/4. You can follow the progress of ThED on the Retrohax web page.
Go! Cart is a new cartridge for the Commodore C64 computer. The cartridge is developed by DeepCore and has the following features are: File Copy, DOS-Wedge, Erase Memory, File Wiper, Turbo Tape, Directory, File Crypter, AR-TurboTape, RAM saver, Monitor and OLD.
The COREi64 web page offers a new product for the retro computer. With the UpCart Plus you can change the angle of your cartridge port by 90 degrees. This will give better access to your cartridge and less lost space behind your C64 or C128. The UpCart Plus also has a reset button.
AkBkukU made a new video about retro computers. This time he is making a XA1541 cable. With this cable you can transfer files between a Commodore C64 computer and a PC.
The COREi64 web page offers a new product for the retro computer. The Ultimate 64 SIDtap is an add-on for the Ultimate 64, which provides two RCA connector for dual SID audio. You can order it as a kit or as fully assembled.
The COREi64 web page offers a new product for the retro computer. If you have a GGLABS GLINK232T interface cartridge you can now add a case to it. When you order a case you can choose from many colours.
Kim Jørgensen developed a new cartridge for the Commodore C64. The Kung Fu Flash can emulate different cartridge types, load PRG files and use D64/D71/D81 images. A few examples of the emulated cartridges are: Action Replay, KCS Power Cartridge, Final Cartridge III, Simons' BASIC and EasyFlash.
There is new firmware available for the U64 / U64E. Changes or improvements in this version: Debug stream over Ethernet, ACIA, Modem Layer, REU, IEC, SuperGames, 1541C, Epyx Fastload, KCS, DMA, telnet, configuration manager, NMI / IRQ and 1764 REU.
The iCore64 web page offers a new product. This mount makes it possible to mount an AztecMonster SCSI to SD board in a ThunderDrive CMD Hard drive clone.
