You can watch a new video from the Commodore History YouTube channel. In this video the modification of the 2000K and the 3000H game-console from a RF output-signal to a video output-signal.

The Minimig revision 9 is now available. The improvement are 6 layers PCB, LED voltage indicators, fast CBTD shifters, OCS/ECS MIA chip. Support for 60MHz MC68SEC000, TF030 @ 50MHz and PiStorm kick.rom caching.

In this episode of the Guru Meditation: Bill talks about the new wireless Amiga Tank Mouse that can be used on an Amiga computer or a modern PC. The Amiga Tank Mouse is developed by Lukas Remis, and can connect via Bluetooth or WiFi/USB.

Retrohax has written a blog about modifying a Commodore C64 computer. The modifications are: A BeamRacer, c0pperdragon, SD2IEC, Ultimate1541 II+, Switchless ROM, SIDFX and a C= Key.

A new episode of the 10 Minute Amiga Retro Cast is now available. In this episode: Installing the BFG 9060 accelerator in an Amiga 3000 or 4000 computer. This 68060 accelerator is developed by Matthias Heinrichs.

You can watch a new video from the Retro Tech Insanity YouTube channel. In this episode an attempt to use a 6502 processor in a Commodore C64 computer.

ZuluSCSI is a SCSI to SD-card interface. The ZuluSCSI can emulate a SCSI (1 & 2) hard disk or CD-ROM drive and stores the data on a SD-card.

You can now watch a new video from the Arctic retro YouTube channel. In this video the installation of a Clearvideo modification in a Commodore VIC20 computer.

GoFloppy Drive is a floppy drive emulator similar to the "Gotek" commonly used in retro hardware. The GoFloppy is developed by Andrew Hutchings and can be used in Amiga computers but also the Acorn Archimedes, Acorn RiscPC, BBC Micro, Atari Falcon, etc.

A new YouTube video from Jan Beta. In this video: Jan is building a Competition Pro joystick clone. He uses an arcade joystick & buttons in a 3D-printed case.

The RAD Expansion Unit is a cartridge for the C64/C128 with a Raspberry Pi. The RAD can emulate a RAM Expansion Units such as the CBM 1700/1750/1764, CLD Super 1750 Clone, CMD 1750/1750XL and GeoRAM/NeoRAM. There is also a menu for REU-images, GeoRAM-images, NUVIE's and PRG's.

Steve Gray started a new hardware project: Building a clone of the Commodore V364 proto-type computer. At this moment he has a keyboard with custom keycaps and a mock-up case. The next step is the speech hardware.

The VIC-II Kawari mini for the C64 computer is now available in the videogameperfection.com web-shop. The VIC-II Kawari is a hardware replacement for the VIC-II chip with extra features.

A new YouTube video from CRG. In this video the built of a new Amiga A2000 computer. This is a redesigned A2000 motherboard that fits in a modern PC-case.

Steve Gray started a new hardware project: The Commodore LCD. This will be a clone of the Commodore LCD proto-type. At this moment he has a working PCB, a keyboard and a 3D printed case. Steve is now testing a LCD screen.

A new video from GadgetUK164. In this video an upgrade and test of a Commodore A2630 CPU accelerator card.

A new YouTube video from Wolfgang Kierdorf is now available. In this episode Wolfgang is upgrading an Amiga 500 computer into an Amiga 500+ computer with 1 MB Chipram, SuperDenise and Kickstart 2.0.

Paul Gardner-Stephen is working on a FPGA version of the Commodore C65. His goal is to make an 8-bit computer for the 21st century. Most recent updates: Let's start doing something about those missing expansion ports, MEGA65 MK-II Keyboard PCB Design and DIY USB JTAG and UART connection for the MEGA65.

Cameron Kaiser made two-factor authentication possible by using a Commodore SX64 computer. The big advantage is that you have a hard time misplacing your 2FA device, and you can identify your keys by using different coloured diskettes for each key.

A new hardware project from Jan Derogee. This time he is working on the speed calibration of a Commodore 1530.

Tentelian Retro is a YouTube channel for retro computer users (German language). In this episode: The Commotron Gamepad Turbo 2000 Super for the Commodore, Atari, Amiga and many other retro computers.

A new video from GadgetUK164. In this video the built of an GottaGoFaZt3r 256MB RAM Zorro 3 expansion-card for the Amiga computer. This expansion is developed by LIV2 (Matt Harlum).

Linus Akesson has made the Commodordion from two Commodore C64 computers, al lot of diskettes and gaffer-tape. The only thing is that it is not an easy instrument to play.

Retrohax has written a blog about modifying an Amiga 500 power-supply. He replaces the old PCB with a new Meanwell power supply.

You can now watch a new video from the Silvestron's bits & bytes YouTube-channel. In this video you can watch the built of the C64 Pico. The C64 Pico is a Raspberry Pi Pico with the MCUME software (Multi CompUter Machine Emulator). The schematics, PCB designs and the MCUME software is available to build your own C64 Pico.

Retrohax has written a blog about modifying a Commodore C64 computer. The modifications are: A BeamRacer, c0pperdragon, SD2IEC, Ultimate1541 II+, Switchless ROM and a SIDFX.

You can now watch a new video from the Dave Poo 2 YouTube-channel. In this video Dave is servicing a Commodore Datassette.

A new video from GadgetUK164. In this video he installs a RGB 2 Amiga converter in an Amiga 500 and an Amiga 2000 computer.

A new episode of the 10 Minute Amiga Retro Cast is now available. In this episode: An upgrade for the Commodore CDTV with memory, keyboard, mouse and a SCSI Hard disk.

You can now watch a new video from the Arctic retro YouTube channel. In this video the built and use of a keyboard tester that was developed by Sven Petersen.

You can now watch a new video from the Dave Poo 2 YouTube-channel. In this video Dave compares the ARMSID, Nano SwinSID and the MOS 6581 Sound Chips for the Commodore C64 computer.

Paul Gardner-Stephen is working on a FPGA version of the Commodore C65. His goal is to make an 8-bit computer for the 21st century. Most recent updates: More development on the MEGAphone with a new PCB.

The AmigaONE X5000 is the latest PowerPC based computer developed by A-EON Technology. The features are: QorlQ P5 64-bit PowerPC - 2GHz, SATA, PCI-e, Xorro, PCI, USB, Ethernet, Serial, SD, AmigaOS 4.1, 4GB DDR3, 240 GB SSD, DVD, RadeonHD R7 240, Soundblaster live and Enhancer Software 2.1.

You can now watch a new video from the Universe64 YouTube channel. In this video a demonstration of the prototype of the new u6510+64 C64 CPU with integrated REU 1750 (512 kB). The u6510+64 CPU is tested with the game SONIC - The Hedgehog.

More videos with the u6510+64 CPU.

Linus Akesson has made a Theremin for the Commodore C64 computer. The Theremin is one of the earliest electronic instruments. It's played by moving one's hands in front of two antennas: One controls pitch and the other controls volume.

Retrohax has written a blog about building and installing the "Mechboard64", a mechanical keyboard, in a Commodore C64 computer.

Brian Seeley started a gofundme campaign to build new keyboards for the Commodore C128D computer. Many C128D computers are available without keyboards, and existing computers would benefit from having new keyboards available if needed.

Chris Edwards Restoration has made a new video. In this video he installed the new CDTV RGB2HDMI that gives you 2 DB9 mouse / game ports, a rom switcher and HDMI video out.

Niklas Ekström developed an Amiga parallel port to SPI adapter. With this adapter you can connect many devices to the Amiga computer, for example a SD-card module.

A new video from GadgetUK164. In this video he installs ZIF IC-sockets and a new modulator in a Commodore C64 computer.

Keir Fraser has released updates for the Greaseweazle hardware. The recent changes are: Support for ibm.800, ibm.2880 and *.MGT formats.

Sidekick64 is a versatile software-defined cartridge for the C64, C128, C16, Plus/4 and VIC20. It uses a Raspberry Pi 3A+/3B+/Zero2 to emulate memory expansions, sound devices, freezers, and many other things. Recent additions are: a MOD/YM/WAVpPlayer (up to 48kHz stereo with dual SID-setups), improved low-latency HDMI-audio output for SID-/FM-/MIDI-emulation, added YM3526/OPL sample playing emulation, more configurability (TFT logos), and a bunch of minor improvements.

SIDKick is a versatile sound device for C64s and C128s: it serves as a drop-in replacement for the SID 6581/8580, and at the same time provides Sound Expander-emulation (Yamaha OPL-based FM sound), a MIDI interface and can control LED stripes. It uses a Teensy 4.1 and makes no compromises with regard to quality: the emulation is based on reSID and fmOPL. It also comes with a few extras such as built-in configuration tool and PRG launcher. Recent updates add YM3526/OPL digi/sample playing emulation and some optimizations/bugfixes.

A new YouTube video from Jan Beta. In this video: Jan is building an Amiga A500 motherboard in a Checkmate 1500 Plus desktop computer-case.

Holger Weßling wrote a book about the THEA500 Mini. In this book: technical information about the console, fascinating facts, interviews with key personnel. And a huge amount of information about the built-in games.

Tynemouth Software has written a blog about the new dual joystick interface from "The Future Was 8 bit" for the Commodore PET computer.

You can now watch a new video from the Alleged_Geek YouTube channel. In this video the build of a joystick adapter for the Commodore C16, C116 and Plus/4.

A new video from GadgetUK164. In this video an Amiga AT Bus Clone (IDE Zorro II Card) - Build & Test.

The A-Pet 500 is a metal case for an Amiga 500 computer in the shape of a Commodore PET computer. You can see an update of the project in this YouTube video.

A new YouTube video from Randy Rossi is now available. In this video Randi shows the recent updates of his hardware replacement for the VIC-II chip in the Commodore C64.